ANALISIS KAPASITAS SALURAN PADA DRAINASE JALAN IMAM BONJOL KELURAHAN PAMUSIAN DENGAN STORM WATER MANAGEMENT MODEL (SWMM)

Afara Zunifa, Aswar Amiruddin

Abstract


An effective drainage system in urban areas is essential to manage flooding caused by heavy rainfall. Inadequate drainage channels cannot accommodate excess water, leading to water stagnation and other negative impacts. Therefore, calculating the design flood discharge and designing drainage channels with sufficient capacity are crucial for stormwater management. This study aims to evaluate the capacity of existing drainage systems to handle design flood discharge and to design new drainage dimensions that can accommodate the largest discharge. The analysis shows that most existing drainage channels are unable to accommodate the design discharge (Qt) for return periods of 10, 20, 50, and 100 years, as the channel discharge (Qs) is smaller than the design discharge. Simulations using the Storm Water Management Model (SWMM) identified critical points at Junction 4 and Junction 10, where overflow occurs due to excess channel capacity. As a solution, new drainage dimensions were designed. A rectangular channel with a bottom width of 1.2 meters and a height of 1 meter can carry the discharge without overflow for a 100-year return period. Meanwhile, a trapezoidal channel with a bottom width of 0.25 meters, a height of 0.8 meters, and a side slope of 0.618 meters is also effective in accommodating the design discharge without overflow. This study recommends increasing the drainage capacity at critical points to reduce the risk of water stagnation

Full Text:

PDF 63-73

References


American Society of Civil Engineering (ASCE). (1982). Gravity Sanitary Sewer Design and Construction (60th ed.). ASCEManualOfPractice.

American Society of Civil Engineering (ASCE). (1992). Design & Construction of Urban Stormwater Management System.

Badan Pusat Statistik. (2023). Kota Tarakan dalam Angka 2023.

Bambang Triatmodjo. (2008). Hidrologi Terapan. Beta Offset.

M. Baitullah Al-Amin. (2020). Pemodelan Sistem Drainase Perkotaan Menggunakan SWMM. Deepublish.

Mashuri, M. Gilang Indra Mardika, & M. Juang Renaldi Fiqri. (2023). Studi Persebaran Banjir Menggunakan Software HEC-RAS 2D V6.2 Hulu DAS Way Sekampung (Studi Kasus: Sungai Way Mincang). Paduraksa: Jurnal Teknik Sipil Universitas Warmadewa, 12(1), 97–105. https://doi.org/10.22225/pd.12.1.6105.97-105

Nathanael, E., & Sejati, W. (2023). Effective Government Management of Flood Discharge in Drainage Channels using HEC-RAS 6.3.1 Application. APTISI Transactions on Management (ATM), 7(3), 210–220. https://doi.org/10.33050

Richard H Mccuen, P A Johnson, & R M Ragan. (1996). Hydrology.

Sholikha, D. E. Z., Sutoyo, S., & Rau, M. I. (2022). Pemodelan Sebaran Genangan Banjir Menggunakan HEC-RAS di Sub DAS Cisadane Hilir. Jurnal Teknik Sipil Dan Lingkungan, 7(2), 147–160. https://doi.org/10.29244/jsil.7.2.147-160

Soewarno. (1995). Hidrologi Aplikasi Metode Statistik Untuk Analisa Data. Nova.

Suripin. (2004). Sistem Drainase Perkotaan Yang Berkelanjutan. Andi.




DOI: https://doi.org/10.35334/cesj.v4i2.6252

Refbacks

  • There are currently no refbacks.


Published By :

Civil Engineering Department, Faculty of Engineering, University of Borneo Tarakan

Jl. Amal Lama No 1, Tarakan 77115, Indonesia
E-Mail : borneo.cesj@gmail.com
Web : http://jurnal.borneo.ac.id/index.php/CESJ/index
Telp : 081233242398 Faks. (0551) 2052558

All publications

by Civil Engineering Scientific Journal

are licensed under a
Creative Commons Attribution-ShareAlike 4.0 International License.