Efek Curing Air Laut Terhadap Kuat Tekan Beton Mutu Tinggi Yang Menggunakan Fly Ash Sebagai Subtitusi Pasir
Abstract
Fly ash waste accumulates from year to year at PLTU in South Sulawesi. The potential of fly ash as an environmentally friendly material to be used as a cement substitute is significant, either partially or entirely. This research aims to analyze the corelation between fly ash substitution as sand substitution and the compressive strength of high-strength concrete treated in seawater and freshwater. Researchers made samples of high-strength concrete with variations in the percentage of fly ash and variations in treatment. Variations in the percentage of fly ash as substitution of sand are 0%, 10%, 20%, and 30%, and variations in curing using fresh water and seawater. Sample treatment was carried out for up to 28 days, after which the compressive strength test according to the Indonesian National Standard (SNI) was carried out. The study results show that the relationship between fly ash substitution and a sand substitution on the compressive strength has a significant correlation. The higher the percentage of fly ash, the higher the compressive strength of the concrete, both fresh and seawater curing. Besides that, the compressive strength of high-strength concrete with freshwater curing treatment is greater than the seawater curing treatment.
Keywords
Full Text:
PDFReferences
Adibroto, F., Suhelmidawati, E. and Zade, A. A. M. (2018) ‘Eksperimen Beton Mutu Tinggi Berbahan Fly Ash Sebagai Pengganti Sebagian Semen’, Jurnal Ilmiah Rekayasa Sipil, 15(1), pp. 11–16. doi: 10.30630/jirs.15.1.85.
B, R. (2020) ‘Influence of fly ash on the properties of recycled coarse aggregate concrete’, International Journal of Emerging Trends in Engineering Research, 8(5), pp. 2097–2100. doi: 10.30534/ijeter/2020/101852020.
Bachtiar, E. et al. (2018) ‘Potensi Limbah Fly Ash Batu Bara PLTU di Sulawesi Selatan sebagai Bahan Dasar Mortar Geopolimer’, Prosiding Seminar Hasil Penelitian (SNP2M), 2018(2), pp. 37–42.
Bachtiar, E. et al. (2020) ‘The Relationship of Temperature and Compressive Strength on Geopolymer Mortar using Fly Ash-Based’, IOP Conference Series: Materials Science and Engineering, 885(1). doi: 10.1088/1757-899X/885/1/012019.
Bachtiar, E. (2021) ‘Characteristics of The Compressive Strength On C – Type Fly Ash Based Geopolymer Mortar’, 22(March), pp. 298–303.
Desianti, I., Rahmaniah, R. and Zelviani, S. (2018) ‘Karakterisasi Nanosilika Dari Abu Terbang Menggunakan Metode Ultrasonic’, Jurnal Fisika dan Terapannya (JFT), 5(2).
Dinakar, P., Kartik Reddy, M. and Sharma, M. (2013) ‘Behaviour of self compacting concrete using Portland pozzolana cement with different levels of fly ash’, Materials & Design, 46, pp. 609–616. doi: 10.1016/j.matdes.2012.11.015.
Duxbury, A. C., Byrne, R. H. and Mackenzie, F. T. (2020) ‘Seawater’. Encyclopedia Britannica, 5 Nov. 2020. Available at: https://www.britannica.com/science/seawater (Accessed: 20 October 2021).
Kabay, N. et al. (2015) ‘Properties of concrete with pumice powder and fly ash as cement replacement materials’, Construction and Building Materials, 85, pp. 1–8. doi: 10.1016/j.conbuildmat.2015.03.026.
Kranthi Vijaya, S., Jagadeeswari, K. and Srinivas, K. (2021) ‘Behaviour of M60 grade concrete by partial replacement of cement with fly ash, rice husk ash and silica fume’, Materials Today: Proceedings, 37, pp. 2104–2108. doi: 10.1016/j.matpr.2020.07.523.
Liu, Jun et al. (2020) ‘Effect of fly ash as cement replacement on chloride diffusion, chloride binding capacity, and micro-properties of concrete in a water soaking environment’, Applied Sciences (Switzerland), 10(18). doi: 10.3390/APP10186271.
Nguyen, D. L. and Duong, M. T. (2019) ‘Compressive Resistance of Environmental Concrete Using Fly Ash and Fine Aggregate for Replacing Traditional Sand’, Applied Mechanics and Materials, 889, pp. 283–288. doi: 10.4028/www.scientific.net/AMM.889.283.
Sultan, M. A. and Djamaluddin, R. (2017) ‘Pengaruh Rendaman Air Laut terhadap Kapasitas Rekatan GFRP-Sheet pada Balok Beton Bertulang’, Jurnal Teknik Sipil, 24(1), pp. 35–42. doi: 10.5614/jts.2017.24.1.5.
T. Phani Madhavi, V.Sampathkumar and P.Gunasekaran (2013) ‘Partial Replacement of Cement and Fine Aggregate by Using Fly Ash and Glass Aggregate’, International Journal of Research in Engineering and Technology, 02(13), pp. 351–355. doi: 10.15623/ijret.2013.0213066.
DOI: https://doi.org/10.35334/be.v1i1.2161
Copyright (c) 2022 Azhari Zahlim, Erniati Bachtiar, Ritnawati Makbul
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Published By : Civil Engineering Department, Faculty of Engineering, University of Borneo Tarakan Jl. Amal Lama No 1, Tarakan 77115, Indonesia | All publications by Borneo Engineering: Jurnal Teknik Sipil are licensed under a |
Borneo Engineering Indexed By: