Rancang Bangun Alat Pemotong Kentang Stick Dengan Menggunakan Mesin Penggerak Dinamo Listrik Skala Rumah Tangga

Deva Dian Satrio Aji, Deny Murdianto, Muhammad Firdan Nurdin

Abstract


The processing of potato into fried potato sticks is one of the popular fastfood processing in Indonesia. One of the entrepreneurs in Tarakan City named Randi still uses manual tools to cut potatoes into the fried potato sticks, so the process is less efficient and effective. To solving this problem, it is necessary to create a potato stick cutting machine that is economically valuable. The purpose of this research is to design an potato stick machine. Based on the final design, the electric motor used is a single-phase AC gearbox motor with a power of 0.18 kW at 41.7 rpm, which is transmitted using a type B V-belt to the potato cutter. The test results of this potato stick cutting machine show a potato stick cutting capacity of 192.17 kg/hour with an electricity usage cost of Rp. 187.84/hour.


Full Text:

PDF

References


M. Iqbal, D. Hibatullah, and N. Eko, “Konsep Desain Rancang Simulasi Mesin Pemotong Kentang,” in Prosiding Seminar Nasional Teknik Mesin Politeknik Negeri Jakarta (2021)Politeknik Negeri Jakarta (2021), 2021, pp. 932–941, [Online]. Available: https://prosiding-old.pnj.ac.id/index.php/sntm/article/view/4021/pdf.

A. C. Wibowo, “Perancangan Alat Pemotong Kentang,” Yogyakarta, 2015. [Online]. Available: AC WIBOWO - core.ac.uk.

Hawari and L. A. Wibowo, “Perancangan Mesin Pemotong Kentang Bentuk Stik,” Pros. SEMNASTER (Seminar Nas. Teknol. dan Ris. Ter., pp. 181–188, 2020, [Online]. Available: https://semnastera.polteksmi.ac.id/index.php/semnastera/article/view/118.

D. Hibatullah, M. Iqbal, N. Eko, and Hamdi, “Analisa Perhitungan Rancang Simulasi Mesin Pemotong Kentang,” in Prosiding Seminar Nasional Teknik Mesin Politeknik Negeri Jakarta (2021), 2021, pp. 922–931, [Online]. Available: https://www.maksindo.com/mesin-pemotong-kentang-2.

Y. Effendi, “Rancang Bangun Alat Pengiris Serbaguna Umbi-Umbian,” J. Tek., vol. 5, no. 2, 2016, doi: 10.31000/jt.v5i2.353.

Sularso and K. Suga, Dasar Perencanaan Dan Pemilihan Elemen Mesin, 11th ed. Jakarta: Pradnya Paramita, 2018.

Syafiq and H. Abdillah, “Mesin pemotong kentang otomatis dengan mekanisme Crank-Slider dan Flexible Cutter,” J. Ris. Drh., no. December 2013, pp. 21–30, 2013.


Refbacks

  • There are currently no refbacks.


Journal BEARINGS published by Mechanical Engineering Department, Faculty of Engineering, Universitas Borneo Tarakan