Perbandingan Ketentuan dan Analisis Detailing Hubungan Balok-Kolom Berdasarkan SNI 2847:2013 dan SNI 2847:2019

Syafri Wardi; Sulaiman Yusuf Ardiansyah

doi:10.35334/be.v1i2.2430

Perbandingan Ketentuan dan Analisis Detailing Hubungan Balok-Kolom Berdasarkan SNI 2847:2013 dan SNI 2847:2019

Syafri Wardi, Sulaiman Yusuf Ardiansyah

Abstract

Recent earthquakes in Indonesia have caused significant damage to many buildings, especially because the beam-column joints did not satisfy the detailing requirements for the seismic-resistant building. SNI 2847: 2013 is an Indonesian code for designing concrete buildings, which has been updated to SNI 2847:2019, consist of several new provisions related to detailing beam-column joints. This study discusses the comparison of detailing requirements based on the two codes and compares the analysis of detailing of the beam-column joints in a focused building, a five-story building which represents a medium rise building. The comparison of detailing requirements for beam-column joint according to SNI 2847:2013 and SNI 2847:2019 showed that SNI 2847:2019 has several new requirements related to the height of the joint, standard hooks in an exterior joint, headed bar, and transverse reinforcement in the joint. Then, comparing the results of analysis of detailing of the beam column joints in the focused building showed that there is no different on the detailing results of the joints according to SNI 2847:2013 dan SNI 2847:2019.

Keywords

beam-column joint; beton bertulang; tahan gempa

Full Text:

PDF

References

ACI Committee 318, 2008, Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary, American Concrete Institute, Farmington Hills, MI.

Anggraini, R., 2019, Analisis Sambungan Balok Kolom Beton Bertulang Pada Daerah Rawan Gempa (Studi Kasus : Gedung Pasar Inpres Blok IV Kota Padang), Jurnal Rekayasa. Vol. 8(2), hal. 96-114.

Ardiansyah, S.Y., 2020, Perbandingan Detailing Hubungan Balok-Kolom Berdasarkan SNI 1726-2847-2013 dan SNI 1726-2019 (Studi Kasus: Gedung Kampus II Institut Teknologi Padang). Tugas Akhir Teknik Sipil Sarjana, Institut Teknologi Padang (tidak dipublikasikan).

Badan Standarisasi Nasional, 2013. Persyaratan Beton Struktural untuk Bangunan Gedung (NI 2847-2013), BSN, Jakarta.

Badan Standarisasi Nasional, 2019. Persyaratan Beton Struktural untuk Bangunan Gedung (SNI 2847-2019), BSN, Bandung.

Li, Y., Sanada, Y., 2017, Seismic Strengthening of Existing RC Beam-Column Joints by Wing Walls. Earthquake Engineering and Structural Dynamics, Vol. 46(12), hal. 1987-2008.

Mulyono, 2000, Petunjuk Standarisasi Desain Gedung Bertingkat, Bandung: Ganeca Exact

Ristanto, E., Suryadi., Irianti, L., 2015, Analisis Joint Balok Kolom dengan Metode SNI 2847-2013 dan ACI 352R-2002 pada Hotel Serela Lampung, JRSDD, Vol. 3(3), hal. 521-540.

Setiawan, A., 2012, Analisis Hubungan Balok Kolom Beton Bertulang Proyek Pembangunan Gedung DPRD-Balai Kota DKI Jakarta, COMTECH, Vol. 3(1), hal. 711-717.

Supardi., Purwanto, E., Adi, B.K., 2017, Evaluasi Kekuatan dan Detailing Tulangan Hubungan Balok Kolom (Joint) Beton Bertulang Sesuai SNI 2847:2013 dan SNI 1726:2012 (Studi Kasus: Hotel Pesonna Semarang), Matriks Teknik Sipil, Vol. 5(1). hal.174-180

Wardi, S., Sanada, Y., Kita, M., Tanjung, J., Maidiawati, 2018, Common Structural Details and Deficiencies in Indonesian RC Buildings: Preliminary Report on Field Investigation in Padang City, West Sumatra, IJASEIT, Vol. 8(2): 418-425. http://dx.doi.org/10.18517/ijaseit.8.2.4207

Wardi, S., Sanada, Y., Saha, N., Takahashi, S., 2020, Improving Integrity of RC Beam-Column Joint with Deficient Beam Rebar Anchorage, Earthquake Engineering and Structural Dynamics, Vol. 49(3):234-260. https://doi.org/10.1002/eqe.3229

Wicaksana, A., & Rosyidah, A., 2021, Pembandingan Perancangan Bangunan Tahan Gempa Menggunakan SNI 1726:2012 Dan SNI 1726:2019, Jurnal Ilmiah Rekayasa Sipil, 18(1), 88-99. https://doi.org/10.30630/jirs.v18i1.416

DOI: https://doi.org/10.35334/be.v1i2.2430

Copyright (c) 2022 Syafri Wardi, Sulaiman Yusuf Ardiansyah

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Published By :

Civil Engineering Department, Faculty of Engineering, University of Borneo Tarakan

Jl. Amal Lama No 1, Tarakan 77115, Indonesia
E-Mail : bejts@borneo.ac.id
Web : http://jurnal.borneo.ac.id/index.php/borneoengineering
Telp : 087704518570 Faks. (0551) 2052558